Oldcastle BuildingEnvelope ICR-225 - Manual (Page 7)




4 March 2012
Phone: 1-866-OLDCASTLE (653-2278)
Web Address: www.oldcastlebe.com
I C R - 2 2 5 - I N S T A L L A T I O N M A N U A L
The frames shown in FIGURES 1 - 4 below are representative of typical frame configurations that are covered
in these instructions. Contact your local Oldcastle BuildingEnvelope ™ facility for custom configurations
involving non-standard installation methods.
FRAME CONFIGURATIONS
Extended Frame (Width > 24’- 0”)
Extended Frame (Width > 24’- 0”)
Type “A” Installation
Standard Punched Opening- Type “A” Installation
(Verticals Run Through)
Figure 1
Figure 2
Figure 3
Figure 4
Standard Punched Opening - Type “B” Installation
(Head and Sill Run Through)
Type “B” Installation