Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 50)

49
Audio
Satellite radio*
̈ Press ß on the control unit.
̈ To enter a channel: Press correspond-
ing number buttons on the control unit.
i
You can only select numbers that are cur-
rently permissible.
COMAND will tune to the channel en-
tered.
Selecting a channel from the SatRadio
channel list
̈ Select “SatRadio” K “Channel List” in
the SatRadio menu.
The channel list appears.
̈ To select a channel: Rotate y m z or
slide q m r .
̈ To tune to the selected channel:
Press
n.
Memory functions
i
There are 10 presets available.
You can use the following functions:
ț Saving channels manually
ț Selecting a channel from the Satellite
preset memory (
୴ page 50)
Storing channels manually
̈ Press n if the display/selection win-
dow is highlighted.
or
̈ Select “Presets” on the SatRadio sub-
menu bar.
In both cases, the channel memory will
appear. The dot
Rin front of a preset
indicates that the currently tuned chan-
nel is stored there.
Station memory
̈ To select a preset: Rotate y m z or
slide q m r .
̈ To store a channel to a selected pre-
set: Press and hold
n until a signal
tone sounds.
or
̈ Press and hold a number key, e.g. 4 ,
until a signal tone sounds.
The channel is stored.