123 navigation – Mercedes-Benz C-Class 2008 COMAND Manual User Manual
Page 124
123
Navigation
Introduction
A checked entry indicates an active
blocked area.
i
You can block several areas for the route
calculation and activate or de-activate them by
setting or removing the check mark.
Displaying and changing an existing
block area
̈
To select the area you want to dis-
play or change: Slide
q
m
r
.
̈
Select “Display/Change”.
The map display appears with the block
area marked red.
̈
Rotate
y
m
z
until the desired size of
the block area is set.
̈
Slide
q
m
r
,
o
m
p
or
w
m
x
to shift the
block area to the desired region.
̈
To confirm the area and exit map
display: Press
n.
̈
Hide menu system if applicable
(
Defining a new Block area
̈
Select “Avoid New Area”.
The map display appears with a default
new block area in red.
̈
Rotate
y
m
z
until the desired size of
the new block area is set.
̈
Slide
q
m
r
,
o
m
p
or
w
m
x
to shift the
new block area to the desired region.
̈
To confirm the area and exit map
display: Press
n.
̈
Hide menu system if applicable
(
Deleting a block area
̈
To select the area you want to de-
lete: Slide
q
m
r
.
̈
Select “Options”
K
“Delete”.
You will be prompted to confirm that
you wish to delete the block area.
̈
Select “Yes” or “No”.
If you select “Yes” COMAND deletes
the entry. A message will be displayed.
Information on map
You can have map information displayed at
the bottom edge of the screen during route
guidance.
̈
To set: Display menu system if applica-
ble (
̈
Select “Navi”
K
“Information On Map”.
A dot
R indicates the current setting.
̈
Select “Arrival Time / Distance” or
“Current Street” or “Geo-coordinates”
or “None”.
̈
To exit menu: Slide
o
m
p
.
̈
Hide menu system if applicable
(