beautypg.com

Wheels and tires, Changing a wheel – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 383

background image

Occupant distribution
The distribution of occupants in a vehicle at

their designated seating positions.
Total load limit
Nominal load and luggage load plus 68 kg

(150 lbs) multiplied by the number of seats in

the vehicle.

Changing a wheel

Flat tire

The "Breakdown assistance" section

(

Y

page 341) contains information and notes

on how to deal with a flat tire. Information on

driving with MOExtended tires in the event of

a flat tire can be found under "MOExtended

tires (tires with run-flat characteristics"

(

Y

page 341).

Rotating the wheels

G

WARNING

Interchanging the front and rear wheels may

severely impair the driving characteristics if

the wheels or tires have different dimensions.

The wheel brakes or suspension components

may also be damaged. There is a risk of acci-

dent.
Rotate front and rear wheels only if the wheels

and tires are of the same dimensions.

!

On vehicles equipped with a tire pressure

monitor, electronic components are loca-

ted in the wheel.
Tire-mounting tools should not be used

near the valve. This could damage the elec-

tronic components.
Only have tires changed at a qualified spe-

cialist workshop.

Always observe the instructions and safety

notes in the "Mounting a wheel" section

(

Y

page 381).

The wear patterns on the front and rear tires

differ, depending on the operating conditions.

Rotate the wheels before a clear wear pattern

has formed on the tires. Front tires typically

wear more on the shoulders and the rear tires

in the center.
If your vehicle's tire configuration allows, you

can rotate the wheels according to the inter-

vals in the tire manufacturer's warranty book

in your vehicle documents. If no warranty

book is available, the tires should be rotated

every 3,000 to 6,000 miles (5,000 to

10,000 km), or earlier if tire wear requires.

Ensure the direction of rotation is maintained.
Clean the contact surfaces of the wheel and

the brake disc thoroughly every time a wheel

is rotated. Check the tire pressure and, if nec-

essary, restart the tire pressure loss warning

system (

Y

page 369) or the tire pressure

monitor (

Y

page 367).

Direction of rotation

Tires with a specified direction of rotation

have additional benefits, e.g. if there is a risk

of hydroplaning. You will only gain these ben-

efits if the correct direction of rotation is

maintained.
An arrow on the sidewall of the tire indicates

its correct direction of rotation.

Storing wheels

Store wheels that are not being used in a cool,

dry and preferably dark place. Protect the

tires from oil, grease, gasoline and diesel.

Mounting a wheel

Preparing the vehicle

X

Stop the vehicle on solid, non-slippery and

level ground.

X

Apply the electric parking brake manually.

X

Bring the front wheels into the straight-

ahead position.

X

Shift the transmission to position P.

Changing a wheel

381

Wheels

and

tires

Z