Mercedes-Benz C-Sedan 2015 Owners Manual - Manual (Page 371)

R you adopt a very sporty driving style (cor-
nering at high speeds or driving with high
rates of acceleration).
R you are driving with a heavy load (in the
vehicle or on the roof).
Restarting the tire pressure loss warn-
ing system
Restart the tire pressure loss warning system
if you have:
R
changed the tire pressure
R
changed the wheels or tires
R mounted new wheels or tires
X Before restarting, make sure that the tire
pressures are set properly on all four tires
for the respective operating conditions.
The recommended tire pressure can be
found on the Tire and Loading Information
placard on the B-pillar. Additionally, a tire
pressure table is attached to the fuel filler
flap. The tire pressure loss warning system
can only give reliable warnings if you have
set the correct tire pressure. If an incorrect
tire pressure is set, these incorrect values
will be monitored.
X Also observe the notes in the section on tire
pressures (
Y
page 361).
X
Make sure that the SmartKey is in position
2 in the ignition lock (
Y
page 157).
X Use ò on the steering wheel to call up
the list of menus.
X
Press the 9 or : button on the steer-
ing wheel to select the Service Service menu.
X Press the a button.
X
Press the 9 or : button to select
Tire Pressure Tire Pressure .
X Press the a button.
The Run Flat Indicator Active Run Flat Indicator Active
Press 'OK' to Restart Press 'OK' to Restart message
appears in the multifunction display.
If you wish to confirm the restart:
X Press the a button.
The Tire Pressure Now OK? Tire Pressure Now OK? message
appears in the multifunction display.
X Press the 9 or : button to select
Yes Yes .
X
Press the a button.
The Run Flat Indicator Restarted Run Flat Indicator Restarted
message appears in the multifunction dis-
play.
After a teach-in period, the tire pressure
loss warning system will monitor the set
tire pressures of all four tires.
If you wish to cancel the restart:
X
Press the % button.
or
X If the Tire Pressure Now OK? Tire Pressure Now OK? message
appears, use the 9 or : button to
select Cancel Cancel .
X
Press the a button.
The tire pressure values stored at the last
restart will continue to be monitored.
Loading the vehicle
Instruction labels for tires and loads
G WARNING
Overloaded tires can overheat, causing a
blowout. Overloaded tires can also impair the
steering and driving characteristics and lead
to brake failure. There is a risk of accident.
Observe the load rating of the tires. The load
rating must be at least half of the GAWR of
your vehicle. Never overload the tires by
exceeding the maximum load.
Two instruction labels on your vehicle show
the maximum possible load.
(1) The Tire and Loading Information placard
is on the B-pillar on the driver's side. The
Tire and Loading Information placard
shows the maximum permissible number
of occupants and the maximum permis-
Loading the vehicle
369
Wh
eels
an
d
tire
s
Z