Maintenance and care, Care – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual
Page 337
X
Make sure that the vehicle is stationary and
that the SmartKey is in position 2 in the
ignition lock.
X
To open the cover of the rear view cam-
era: with COMAND or Audio 20 activated,
call up the vehicle menu: press the Ñ
button.
X
To switch to the menu bar: slide ¬ the
controller.
X
To select
System Settings
System Settings
: turn and
press the controller.
X
To select
Rear view camera
Rear view camera
: turn and
press the controller.
X
To select
Open camera cover
Open camera cover
: turn and
press the controller.
The rear view camera cover opens.
X
To clean the rear view camera: use clear
water and a soft cloth to clean camera
lens :.
Cleaning the 360° camera
!
Do not clean the camera lens and the area
around the 360° camera with a power
washer.360
X
Make sure that the vehicle is stationary and
that the SmartKey is in position 2 in the
ignition lock.
X
To open the cover of the 360° camera:
with COMAND or Audio 20 activated, call
up the vehicle menu: press the Ñ but-
ton.
X
To switch to the menu bar: slide ¬ the
controller.
X
To select
System Settings
System Settings
: turn and
press the controller.
X
To select the
360°
360° camera
camera
: turn and press
the controller.
X
To select
Open camera cover
Open camera cover
: turn and
press the controller.
The cover of the 360° camera opens.
X
To clean the 360° camera: clean camera
lens : with clean water and a soft cloth.
If you drive at speeds above 20 mph
(30 km/h) or with the SmartKey in position 0
or 1 in the ignition lock, the cover of the 360°
camera closes automatically.
Cleaning the exhaust pipes
G
WARNING
The exhaust tail pipe and tail pipe trim can
become very hot. If you come into contact
with these parts of the vehicle, you could burn
yourself. There is a risk of injury.
Always be particularly careful around the
exhaust tail pipe and the tail pipe trim. Allow
these components to cool down before touch-
ing them.
!
Do not clean the exhaust pipe with acid-
based cleaning agents such as sanitary
cleansers or wheel cleaners.
Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the exhaust
pipe by cleaning it regularly, especially in win-
ter and after washing.
Care
335
Maintenance
and
care
Z