Mercedes-Benz C-Sedan 2015 Owners Manual - Manual (Page 122)

X Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X
Press button = for the exterior mirror on
the front-passenger side.
X Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X Use adjustment button ; to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving posi-
tion.
Using the memory button
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M :.
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X Press button = for the exterior mirror on
the front-passenger side.
X
Use adjustment button ; to adjust the
exterior mirror to a position that allows you
to see the rear wheel and the curb.
X
Press memory button M : and one of the
arrows on adjustment button ; within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position set-
ting
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X Adjust the exterior mirror on the front-
passenger side using button =.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R about ten seconds after you have disen-
gaged reverse gear
R
if you press button ? for the exterior mir-
ror on the driver's side
Memory function
Important safety notes
G WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
120
Memory function
Seat
s,
st
eerin
g
wheel
and
mirro
rs