On-bo ard computer and displays – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual
Page 288

Warning/
indicator
lamp
N
N Signal type
Possible causes/consequences and M
M Solutions
!
N The yellow ABS warning lamp is lit while the engine is running.
ABS (Anti-lock Braking System) is deactivated due to a malfunction. Therefore
BAS (Brake Assist), BAS PLUS, COLLISION PREVENTION ASSIST PLUS, ESP
®
(Electronic Stability Program), Crosswind Assist, PRE‑SAFE
®
, PRE‑SAFE
®
PLUS, PRE‑SAFE
®
Brake, HOLD function, hill start assist, STEER CONTROL,
Active Lane Keeping Assist and Active Blind Spot Assist are also deactivated.
ATTENTION ASSIST is deactivated.
G
WARNING
The brake system continues to function normally, but without the functions
listed above. The wheels could therefore lock if you brake hard, for example.
The steerability and braking characteristics may be severely affected. The
braking distance in an emergency braking situation can increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Observe the additional display messages in the multifunction display.
X
Drive on carefully.
X
Visit a qualified specialist workshop.
If the ABS control unit is faulty, there is also a possibility that other systems,
such as the navigation system or the automatic transmission, will not be
available.
286
Warning and indicator lamps in the instrument cluster
On-bo
ard
computer
and
displays