Mercedes-Benz C-Sedan 2015 Owners Manual - Manual (Page 275)

Display messages Possible causes/consequences and M M Solutions
Blind Spot Assist Blind Spot Assist
Currently Unavail‐ Currently Unavail‐
able See Opera‐ able See Opera‐
tor's Manual tor's Manual or
Active Blind Spot Active Blind Spot
Assist Currently Assist Currently
Unavailable See Unavailable See
Operator's Manual Operator's Manual
Blind Spot Assist or Active Blind Spot Assist is temporarily inop-
erative. Possible causes are:
R
function is impaired due to heavy rain or snow.
R
the radar sensor system is outside the operating temperature
range.
R the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
When the causes stated above no longer apply, the display mes-
sage disappears.
Blind Spot Assist or Active Blind Spot Assist is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X Secure the vehicle against rolling away (
Y
page 174).
X Restart the engine.
Blind Spot Assist Blind Spot Assist
Inoperative Inoperative or
Active Blind Spot Active Blind Spot
Assist Inoperative Assist Inoperative
Blind Spot Assist or Active Blind Spot Assist is defective.
X
Visit a qualified specialist workshop.
Park Assist Can‐ Park Assist Can‐
celed celed
The driver's door is open.
X
Repeat the parking gap measurement and parking process with
the driver's door closed.
You touched the multifunction steering wheel while steering inter-
vention was active.
X
While steering intervention is active, make sure that the multi-
function steering wheel is not touched unintentionally.
The vehicle has started to skid and ESP ® has intervened.
X
Use Active Parking Assist again later (
Y
page 202).
Park Park Assist Assist Inoper‐ Inoper‐
ative ative
PARKTRONIC is malfunctioning or faulty.
X
Follow the instructions and helpful hints in the "Problems with
PARKTRONIC" section (
Y
page 202).
If the display message continues to be displayed:
X
Visit a qualified specialist workshop.
Display messages
273
On
-b
oar
d
comp
ut
er
an
d
di
sp
lay
s
Z