Lights and windshield wipers, Changing bulbs (vehicles with halogen headlamps) – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual
Page 133

Vehicles with halogen headlamps
:
Low-beam headlamp: H7 55 W
;
High-beam headlamp: H7 55 W
=
Turn signal lamp: PWY 24 W
Tail lamp (halogen headlamps)
:
Turn signal: P 21 W
;
Backup lamp: W 16 W
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
X
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : 180° outwards until it
stops using a suitable object.
Cover ; is released.
X
Fold cover ; upwards.
X
To install: insert cover ; into the left,
right and two lower catches.
X
Turn rotary knob : 180° inwards until it
stops using a suitable object.
Cover ; is locked.
Low-beam headlamps
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Turn bulb holder ; counter-clockwise and
pull it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Changing bulbs (vehicles with halogen headlamps)
131
Lights
and
windshield
wipers
Z