beautypg.com

Roadside assistance, Towing and tow-starting – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 354

background image

!

Secure the tow rope or tow bar to the

towing eye only. Otherwise, the vehicle

could become damaged.

!

Do not use the towing eyes for recovery

purposes as this could damage the vehicle.

If in doubt, recover the vehicle with a crane.

!

When towing, pull away slowly and

smoothly. If the tractive power is too high,

the vehicles could be damaged.

!

Shift the automatic transmission to N and

do not open the driver's or front passeng-

er's door during towing. The automatic

transmission may otherwise shift to posi-

tion P, which could damage the transmis-

sion.

!

Do not tow with sling-type equipment.

This could damage the vehicle.

!

The vehicle can be towed a maximum of

30 miles (50km). The towing speed of

30 mph (50 km/h) must not be exceeded.
If the vehicle has to be towed more than

30 miles (50km), the entire vehicle must be

raised and transported.

!

If you tow or tow-start another vehicle, its

weight must not exceed the maximum per-

missible gross vehicle weight of your vehi-

cle.

Details on the permissible gross vehicle

weight of your vehicle can be found on the

vehicle identification plate (

Y

page 396).

It is better to have the vehicle transported

than to have it towed away.
If the vehicle has suffered transmission dam-

age, have it transported on a transporter or

trailer.
The automatic transmission must be in posi-

tion N when the vehicle is being towed. If the

automatic transmission cannot be shifted to

position N, have the vehicle transported on a

transporter or trailer.

The battery must be connected and charged.

Otherwise, you:

R

cannot turn the SmartKey to position 2 in

the ignition lock

R

cannot release the electric parking brake

R

cannot shift the automatic transmission to

position N

Disarm the automatic locking feature before

the vehicle is towed (

Y

page 88). You could

otherwise be locked out when pushing or

towing the vehicle.

Installing/removing the towing eye

Installing the towing eye

The brackets for the screw-in towing eyes are

located in the bumpers. They are at the rear

and at the front, under covers :.

X

Remove the towing eye from the vehicle

tool kit/stowage tray (

Y

page 340).

X

Press the mark on cover : inwards and

remove.

X

Screw in and tighten the towing eye clock-

wise to the stop.

352

Towing and tow-starting

Roadside

Assistance