beautypg.com

Maintenance and care, Care – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 332

background image

should drive for a few minutes after clean-

ing. Braking heats the brake discs and the

brake pads/linings, thus drying them. The

vehicle can then be parked.

Regular care of your vehicle is a condition for

retaining the quality in the long term.
Use care products and cleaning agents rec-

ommended and approved by Mercedes-Benz.

Washing the vehicle and cleaning the

paintwork

Automatic car wash

G

WARNING

Braking efficiency is reduced after washing

the vehicle. There is a risk of an accident.
After the vehicle has been washed, brake

carefully while paying attention to the traffic

conditions until full braking power is restored.

!

If DISTRONIC PLUS or the HOLD function

is activated, the vehicle brakes automati-

cally in certain situations. To prevent dam-

age to the vehicle, deactivate DISTRONIC

PLUS and the HOLD function in the follow-

ing or other similar situations:

R

when towing the vehicle

R

in the car wash

!

Never clean your vehicle in a Touchless

Automatic Car Wash as these use special

cleaning agents. These cleaning agents can

damage the paintwork or plastic parts.

!

Make sure that:

R

the side windows and the sliding sunroof

are fully closed.

R

the ventilation/heating is switched off

(the OFF button has been pressed).

R

the windshield wiper switch is at position

0.

R

the 360° camera or rear view camera is

switched off.

The vehicle may otherwise be damaged.

!

If the SmartKey is within the rear detec-

tion range of KEYLESS-GO, the following

situations, for example, could lead to the

unintentional opening of the trunk:

R

using a car wash

R

using a power washer

Make sure that the SmartKey is at least

10 ft (3 m) away from the vehicle.

!

Make sure that the automatic transmis-

sion is in neutral position N when washing

your vehicle in a tow-through car wash. The

vehicle may otherwise be damaged.

R

Operating with the SmartKey:
Do not remove the SmartKey from the

ignition lock. Do not open the driver's

door when the engine is switched off or

at very low speeds. Otherwise, when in

transmission position D or R the auto-

matic transmission will automatically

switch to park position P and block the

wheels.

R

Operating with the Start/Stop button:
Do not open the driver's door when the

engine is switched off or at very low

speeds. Otherwise, when in transmission

position D or R the automatic transmis-

sion will automatically switch to park

position P and block the wheels.

Observe the following to make sure that the

automatic transmission stays in position N

neutral:
Operating with the SmartKey:

X

Make sure that the ignition is switched on.

X

Make sure that the vehicle is stationary.

X

Depress and hold the brake pedal.

X

Shift to neutral N.

X

Release the brake pedal.

X

Release the electric parking brake, if nec-

essary.

X

Switch off the ignition and leave the Smart-

Key in the ignition lock.

330

Care

Maintenance

and

care