beautypg.com

Driv ing and pa rki ng, Driving systems – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 198

background image

Information in the multifunction display

If Steering Assist and Stop&Go Pilot are acti-

vated but is not ready for a steering interven-

tion, steering wheel symbol : appears in

gray. If the system provides you with support

by means of steering interventions, sym-

bol : is shown in green.
Deactivating Steering Assist and Stop&Go

Pilot

X

Press button ;.

Indicator lamp : goes out. The

DTR+:

DTR+:

Steering Assist. Off

Steering Assist. Off

message

appears in the multifunction display. Steer-

ing Assist and Stop&Go Pilot are deactiva-

ted.

When DISTRONIC PLUS is deactivated, Steer-

ing Assist and Stop&Go Pilot are deactivated

automatically.

HOLD function

General notes

The HOLD function can assist the driver in the

following situations:

R

when pulling away, especially on steep

slopes

R

when maneuvering on steep slopes

R

when waiting in traffic

The vehicle is kept stationary without the

driver having to depress the brake pedal.
The braking effect is canceled and the HOLD

function deactivated when you depress the

accelerator pedal to pull away.

Important safety notes

G

WARNING

When leaving the vehicle, it can still roll away

despite being braked by the HOLD function if:

R

there is a malfunction in the system or in

the voltage supply.

R

the HOLD function has been deactivated by

pressing the accelerator pedal or the brake

pedal, e.g. by a vehicle occupant.

R

the electrical system in the engine com-

partment, the battery or the fuses have

been tampered with.

R

the battery is disconnected

There is a risk of an accident.
If you wish to exit the vehicle, always turn off

the HOLD function and secure the vehicle

against rolling away.

!

If DISTRONIC PLUS or the HOLD function

is activated, the vehicle brakes automati-

cally in certain situations. To prevent dam-

age to the vehicle, deactivate DISTRONIC

PLUS and the HOLD function in the follow-

ing or other similar situations:

R

when towing the vehicle

R

in the car wash

Activation conditions

You can activate the HOLD function if all of

the following conditions are fulfilled:

R

the vehicle is stationary.

R

the engine is running or if it has been auto-

matically switched off by the ECO start/

stop function.

R

the driver's door is closed or your seat belt

is fastened.

R

the electric parking brake is released.

R

the transmission is in position D, R or N.

R

DISTRONIC PLUS is deactivated.

196

Driving systems

Driv

ing

and

pa

rki

ng