beautypg.com

Lights and windshield wipers, Exterior lighting – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 130

background image

The system automatically adapts the low-

beam headlamp range depending on the dis-

tance to the other vehicle. Once the system

no longer detects any other vehicles, it reac-

tivates the high-beam headlamps.
The system's optical sensor is located behind

the windshield near the overhead control

panel.

Important safety notes

G

WARNING

Adaptive Highbeam Assist does not recognize

road users:

R

who have no lights, e.g. pedestrians

R

who have poor lighting, e.g. cyclists

R

whose lighting is blocked, e.g. by a barrier

In very rare cases, Adaptive Highbeam Assist

may fail to recognize other road users that

have lights, or may recognize them too late. In

this or similar situations, the automatic high-

beam headlamps will not be deactivated or

activated regardless. There is a risk of an acci-

dent.
Always carefully observe the traffic conditions

and switch off the high-beam headlamps in

good time.

Adaptive Highbeam Assist cannot take into

account road, weather or traffic conditions.

Adaptive Highbeam Assist is only an aid. You

are responsible for adjusting the vehicle's

lighting to the prevailing light, visibility and

traffic conditions.
In particular, the detection of obstacles can

be restricted if there is:

R

poor visibility, e.g. due to fog, heavy rain or

snow

R

dirt on the sensors or the sensors are

obscured

Switching Adaptive Highbeam Assist

on/off

X

To switch on: turn the light switch to Ã.

X

Press the combination switch beyond the

pressure point in the direction of arrow :.

The _ indicator lamp in the multifunc-

tion display lights up if it is dark and the

light sensor activates the low-beam head-

lamps.
If you are driving at speeds above 25 km/h:
If you are driving at speeds above approx-

imately 16 mph (25 km/h):
The headlamp range is set automatically

depending on the distance between the

vehicle and other road users.
If you are driving at speeds above approx-

imately 19 mph (30 km/h) and no other

road users have been detected:
The high-beam headlamps are switched on

automatically. The K indicator lamp in

the instrument cluster also lights up.
If you are driving at speeds below approx-

imately 16 mph (25 km/h) or other road

users have been detected or the roads are

adequately lit:
The high-beam headlamps are switched off

automatically. The K indicator lamp in

the instrument cluster goes out. The _

indicator lamp in the multifunction display

remains lit.

X

To switch off: move the combination

switch back to its normal position or move

the light switch to another position.

The _ indicator lamp in the instrument

cluster goes out.

Headlamps fogged up on the inside

Certain climatic and physical conditions may

cause moisture to form in the headlamp. This

moisture does not affect the functionality of

the headlamp.

128

Exterior lighting

Lights

and

windshield

wipers