Mercedes-Benz C-Sedan 2015 Owners Manual - Manual (Page 250)

X Press the : or 9 button to select the
Daytime Running Lights Daytime Running Lights function.
If the Daytime Running Lights Daytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in white.
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 124).
Instrument cluster submenu
Selecting the unit of measurement for dis-
tance
The
Display Unit Speed-/Odometer: Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in
the multifunction display.
X
Use ò on the steering wheel to call up
the list of menus.
X Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X
Confirm by pressing a on the steering
wheel.
X Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X
Press a to confirm.
X Press the : or 9 button to select the
Display Unit Speed-/Odometer Display Unit Speed-/Odometer func-
tion.
You will see the selected setting: km km or
miles miles .
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R Digital speedometer in the Trip Trip menu
R Odometer and the trip odometer
R Trip computer
R
Current consumption and the range
R
Navigation instructions in the Navi Navi menu
R Cruise control
R DISTRONIC PLUS
R ASSYST PLUS service interval display
Selecting the permanent display function
Using the
Permanent Permanent Display: Display: function you
can enable outside temperature and addi-
tional speedometer displays in the status
area of the multifunction display.
X
Use ò on the steering wheel to call up
the list of menus.
X Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X
Confirm by pressing a on the steering
wheel.
X Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X
Press a to confirm.
X Press : or 9 to select the Perma‐ Perma‐
nent Display nent Display function.
X
Press a to confirm.
The current selection Outside Tempera‐ Outside Tempera‐
ture ture or Speedometer Speedometer is displayed.
X
To change the setting: press a again.
Switching the additional speedometer
on/off
Use the
Additional Speedometer Additional Speedometer function
to choose whether the status area in the mul-
tifunction display shows the speed digitally.
The unit in the additional speedometer is
always inverse to the speedometer unit.
X Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Instrument Cluster Instrument Cluster submenu.
X Press a to confirm.
X
Use : or 9 to select the Addi‐ Addi‐
tional Speedometer tional Speedometer function.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
248
Menus and submenus
On-board
comput
er
and
display
s