beautypg.com

Driv ing and pa rki ng, Driving systems – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 223

background image

(

Y

page 243) are shown in green. Lane

Keeping Assist is ready for use.

X

To switch off: press button ;.

Indicator lamp : goes out. Lane Keeping

Assist is deactivated. The

Lane Keeping

Lane Keeping

Assist Off

Assist Off

message appears in the mul-

tifunction display.

Selecting Standard or Adaptive setting

X

In the

DriveAssist

DriveAssist

menu on the on-board

computer, select the

Lane Keeping

Lane Keeping

Assist

Assist

function (

Y

page 246).

X

Select

Standard

Standard

or

Adaptive

Adaptive

.

Standard
When

Standard

Standard

is selected, no warning vibra-

tion occurs if:

R

you switch on the turn signals. In this event,

the warnings are suppressed for a certain

period of time.

R

a driving safety system intervenes, such as

ABS, BAS or ESP

®

.

Adaptive
When

Adaptive

Adaptive

is selected, no warning vibra-

tion occurs if:

R

you switch on the turn signals. In this event,

the warnings are suppressed for a certain

period of time.

R

a driving safety system intervenes, e.g.

ABS, BAS or ESP

®

.

R

you accelerate hard, e.g. kickdown.

R

you brake hard.

R

you steer actively, e.g. swerve to avoid an

obstacle or change lanes quickly.

R

you cut the corner on a sharp bend.

In order that you are warned only when nec-

essary and in good time if you cross the lane

marking, the system recognizes certain con-

ditions and warns you accordingly.

The warning vibration occurs earlier if:

R

you approach the outer lane marking on a

bend.

R

the road has very wide lanes, e.g. a high-

way.

R

the system recognizes solid lane markings.

The warning vibration occurs later if:

R

the road has narrow lanes.

R

you cut the corner on a bend.

Driving Assistance PLUS package

General notes

The Active Driving Assistance PLUS package

consists of DISTRONIC PLUS (

Y

page 185),

Active Blind Spot Assist (

Y

page 221) and

Active Lane Keeping Assist (

Y

page 224).

Active Blind Spot Assist

General notes
Active Blind Spot Assist uses a radar sensor

system, pointed toward the rear of the vehi-

cle, to monitor the area to the sides of the

vehicle which the driver is unable to see. A

warning display in the exterior mirrors draws

your attention to vehicles detected in the

monitored area. If you then switch on the cor-

responding turn signal to change lane, you

will also receive an optical and audible warn-

ing. If a risk of lateral collision is detected,

corrective braking may help you avoid a col-

lision. Active Blind Spot Assist evaluates the

free space in the direction of travel and to the

side before making a course-correcting brake

application. For this, Active Blind Spot Assist

uses radar sensors which are pointed in the

direction of travel.
Active Blind Spot Assist supports you from a

speed of approximately 20 mph (30 km/h).
Important safety notes
Active Blind Spot Assist is only an aid and is

not a substitute for attentive driving.

Driving systems

221

Driv

ing

and

pa

rki

ng

Z