Dr ivi ng an d parki ng, Driving systems – Mercedes-Benz C-Sedan 2015 Owners Manual User Manual

Page 217

Top view with picture from the mirror

camera

Symbol for the top view and forward-

facing mirror camera setting

;

Yellow guide line for the vehicle width

including the exterior mirrors (right side of

vehicle)

Yellow guide line for the vehicle width

including the exterior mirrors (left side of

vehicle)

You can also select the mirror camera

setting for the rear-facing view.

Wide-angle function

Symbol for the full screen setting with rear

view camera image

;

Own vehicle

PARKTRONIC warning displays

If the vehicle is equipped with PARKTRONIC

and the function is active (

page 201), warn-

ing displays = in the COMAND display are

also active or light up accordingly.

PARKTRONIC appears:

in split screen view as red or yellow brack-

ets around the vehicle icon in the top view,

in the full screen view, on the right-hand

side at the bottom as red or yellow brackets

around the vehicle icon

The full screen display can also be selec-

ted as front view.

Select this view when you are driving out of an

exit and the view of crossing traffic is restric-

ted, for example.

To select split-screen view, select the

% symbol in the display then confirm

with the COMAND controller.

Object detection

The 360° camera helps detect moving and

stationary objects. If an object (person, vehi-

cle, other obstacle) is detected, this object is

marked with a bar. Objects located some dis-

tance from the vehicle away are marked with

a yellow bar. If the distance to the object is

very small, the bar is displayed in red.
Object detection only functions in both full

screen modes.
To ensure that you can use the function, it

must be switched on in COMAND (see the

separate operating instructions).

Exiting 360° camera display mode

As soon as the vehicle exceeds a speed of

19 mph (30 km/h), the function switches off.

The view which was active before the 360°

camera was displayed appears in the

COMAND display. You can also stop the 360°

camera display from split-screen view by

selecting the % symbol in the display and

then confirming with the COMAND controller.
Vehicles with automatic transmission: the

360° camera display is also ended if you

select transmission position P.

Driving systems

215

ivi

parki