Cabletron Systems Smart 04-0053-01 - Manual (Page 97)

SmartSwitch ATM User Guide 7-5
Firmware Upgrades and Bootline Commands Bootline Commands
Figure 7-1 Memory locations affected by the bootline commands
scsm Switch to the redundant CSM:
Tells the SmartSwitch 6500 to transfer CSM
mastership to the slave CSM.
none
swms Switches CPU mastership to other
TSM/CPU:
Changes the slave TSM/CPU to the master.
none
Table 7-1 Bootline commands (Continued)
Command Action Parameters
initial boot routines
boot image 0 boot image 1
MAC addresses
POST diagnostics
ATM SmartSwitch
operating firmware
Secondary flash RAM
boot PROM
Image is downloaded into boot PROM by df b
Cleared by clfs
chpi sets which is the default boot image
POST is downloaded into
flash RAM by
df p
ponf turns POST on and off.
Switch firmware is downloaded
to flash RAM by
df s
go runs switch firmware in
DRAM
configuration storage
Primary flash RAM