Cabletron Systems Smart 04-0053-01 - Manual (Page 124)

A-8 SmartSwitch ATM User Guide
Managing an ATM SmartSwitch Agent Support
• Community: Sets the community strings for the ATM SmartSwitch
• TrapCommunity: Specifies the NMS to which traps are sent
• MyNMAddr: Specifies the IP address through which the switch is managed
• TrustedNMS:Specifies the IP address of the NMS allowed to perform the following commands:
-
update firmware
-
backup
-
restore
-
reboot
A.2.2 Default Community Strings
The following is a list of the default community strings used by the ATM SmartSwitch:
• public — Used for all standard SNMP communication
• ILMI — Used by ILMI channels between switches
• zeitnet — Used by the SmartSwitch ATM Administrator program
Caution If the community string zeitnet is changed on the ATM SmartSwitch it must also
be changed at the SmartSwitch ATM Administrator. Failure to do so, makes the
ATM SmartSwitch unreachable by the SmartSwitch ATM Administrator
program.