Cabletron Systems Smart 04-0053-01 - Manual (Page 25)

SmartSwitch ATM User Guide 2-7
IP Over ATM and LANE Creating an Emulated LAN
The LECS address is constructed from:
netprefix + CPU MAC address + selector byte of 01
For example
netprefix = 39:00:00:00:00:00:00:00:00:00:14:41:89
chassis MAC address = 00:20:D4:14:41:80
then,
default LECS address = 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:14:41:80:01
The LES and BUS have the same ATM address. LES and BUS addresses are constructed from:
netprefix + CPU MAC address with last byte summed with the ELAN number + numerical value two (2)
For example
netprefix = 39:00:00:00:00:00:00:00:00:00:A3:87:0B
CPU MAC address = 00:20:D4:14:41:80
ELAN number = 3
then,
default LES and BUS addresses = 39:00:00:00:00:00:00:00:00:00:14:41:80:00:20:D4:14:41:83:02
SmartSwitch 6500 Default LANE Addressing
The netprefix is constructed from:
39 + nine zero bytes + last three bytes of chassis MAC address
For example, the chassis MAC address = 00:00:1D:A3:87:0B ,
then
default netprefix = 39:00:00:00:00:00:00:00:00:00:A3:87:0B
The local client address is constructed from:
netprefix + CPU MAC address, with last byte summed with the client number + zero selector byte
For example
netprefix = 39:00:00:00:00:00:00:00:00:00:A3:87:0B
chassis MAC address = 00:00:1D:A3:87:0B,
CPU MAC address = 00:20:D4:14:41:80 ,
client number = 5
then,
client five’s default ATM address = 39:00:00:00:00:00:00:00:00:00:A3:87:0B:00:20:D4:14:41:85:00