AVer MXR6008 - Manual (Page 52)

46
- Description
Add a short comment
(4) Remote Camera Setting
- IP
Enter the IP address of the camera
- Port
The port for connection
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
- Connect
Click to connect the camera when all configurations are set.
3.5 Recording Setting
Click Update to accept the new settings, click Cancel to exit without saving, and click Default to
revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras,
enable the ALL check box. To select more than one camera, Right click on the camera icon. To
select one camera only, Left click on the camera icon. The camera icon turns purple when it is
selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical blocks
represent the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a