AVer MXR6008 - Manual (Page 124)

118
Chapter 9 Web Tools
The bundled Web Tools includes iDispatch Server, Remote iBackup, and Remote iSetup program. To
install Web Tools, place the CD into the CD-ROM drive then click Install Web Tool. And then, follow the
install wizard to complete the installation.
9.1 Using the iDispatch Server
Dispatch is designed to reduce the network traffic of the DVR server. Instead of connecting directly to the
DVR server, the client can connect to the computer that is connected to the DVR server using the
Dispatch program.
1. Make sure you are connected to the internet.
2. Click Start>Programs>Web Tool>Dispatch.
3. In the DVR Server section, enter the DVR server IP, port, user
ID and password. You can also select to display the language
you prefer.
4. Auto connect when start: Enable to automatically connect
the dispatch server when start up
5. 3GPP Service: Enable to allow user using 3GPP service to
receive video stream from Dispatch server. The Service Port
must same as RTSP port of 3GPP on DVR server.
6. In the Dispatch Service section, if you have installed more
than one network card, select the Service IP number.
7. In the Dynamic DNS Configuration section, enter the DNS
server Name and Password. The DNS server can be the
remote storage server for sharing the DVR system loading.
8. Click START to connect.