AVer MXR6008 User Manual
Page 127
121
(3) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.
- Playback Mode
Select the mode of playback the video.
Select date and time: Select the date and time which user wants to playback.
Play the last file: Automatically playback the video from the last hour
Instant Playback: Automatically playback the video which has just recorded. To set the
instant playback time period, fill in the time in second at Set Instant Playback
’s Play
Time column.
- Date Format
Select the date format which wants to display in Select date and time playback mode
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically
switches to the next video in cycle depending on the set time gap.
(4) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto Record after system boot up
Automatically start video recording when the DVR system is executed.
(5) Date and Time Setting
Adjust the DVR system time and date. Click Setting to select the month, date, hour, and minute.
(6) Firmware
Display current system and connected IP camera firmware version.