2 enabling the gps function, Enabling the gps function – AVer MOB1304 User Manual

Page 34

2.4.2 Enabling the GPS Function

GPS must be enabled in order to receive the GPS data. Follow the below steps to enable the GPS

function on the MOB DVR system

1. Press

or use mouse right-click on the screen to call out the OSD menu.

Select the Miscellaneous from Main menu.

MAIN MENU

CAMERA/REC

SCHEDULE
EVENT SETUP

DISPLAY

STORAGE

NETWORK

SYSTEM
MISCELLANEOUS

3. Select GPS from Miscellaneous menu.

MISCELLANEOUS SETUP

MUTLIPLE DVR

GPS

GSM
3G

ENTERTAINMENT

4. Enable the data (Latitude, longitude, heading, speed)and select unit of the distance (KM or Mile). To

enable the selection, press

and use

¡¡

and

¡¡

to mark and un-mark the selection. To

confirm the selection, press

. User also can use mouse click the selection and use the roller

button to change the selection value.

LATITUDE
LONGITUDE

DISPLAY MESSAGE

HEADING
SPEED OVER GROUND
KM / MILE

GPS SETUP

LATITUDE
LONGITUDE

DISPLAY MESSAGE

HEADING
SPEED OVER GROUND
KM / MILE

GPS SETUP

5. Press

or use mouse left-click on the screen to exit from OSD menu. The GPS configuration is

completed.