Quick start guide, Install the batteries, F focus the subject – Canon Rebel Ti 300V User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Quick Start Guide

^ f ( 1

Install the batteries.

Insert two CR2 lithium bat

teries as shown by the bat
tery orientation diagram on
the battery compartment

cover, (^page 14)

Align the red dots on the

lens and camera and turn

the lens as shown by the

arrow until it snaps into
place, (^page 16)

Load the film.

Align the edge of the film

with the < A > mark, and

close the back cover until it
snaps shut, (^page 18)

• The film will then advance

to the first frame

automatically.

Focus the subject.

"h- Aim the AF point on the

'■ subject and press the shut

ter button halfway to auto
focus. (^page 22)

• Under low-light or backlit

conditions, the built-in flash
will pop-up and fire

automatically. (->page 49)