Depth-of-field preview, A-dep – Canon Rebel Ti 300V User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I ^

Check the viewfinder display and

' take the picture.

• If the shutter speed display does not

blink, a correct exposure will be obtained

• If the slowest shutter speed blinks, it indi

cates underexposure. In such a case,

I turn the < ¿Si > dial to set a larger aper

ture (smaller f/number) until the shutter
speed display stops blinking.

• If the fastest shutter speed blinks, it indi

cates overexposure. In such a case, turn
the dial to set a smaller aperture

(larger f/number) until the shutter speed

display stops blinking

Aperture Display
The aperture can be set and displayed in full and half stops as shown below
The larger the number, the smaller the aperture opening will be. The dls-
playable range of apertures depends on the lens mounted on the camera.

1.0

l.г

/,4

I.B

¿0

e.s

¿.

B.D

9.5

i I

3 1

Depth-of-field Preview

To check the depth of field, press the

depth-of-field preview button. The
camera will stop down the aperture
and you can check the in-focus range

in the viewfinder.

•

• This feature works in Creative Zone modes.
• When you press the depth-of-field preview button, AE lock also takes effect
• In the <

A-DEP

> mode, press the shutter button halfway to focus, then keep

pressing the shutter button halfway and press the depth-of-field preview button