Checking the film speed, Unloading film – Canon Rebel Ti 300V User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4>
i
The shutter curtains have been manufactured with very high precision.
Never touch them with your fingers. When ioading film, do not touch or dam
age the curtains with your fingers or film.
In hot and humid environments, do not remove the film packaging until you
are ready to load the film,
' if the film is not loaded properly, the <@> icon will blink on the LCD panel
and the shutter will not work. Reload the film cartridge properly, (^page 18)
- If you want to set a film speed different from the DX-coded film speed or if
the film cartridge is not DX-coded, see “Setting the ISO Film Speed" on
page 50
‘ Infrared film cannot be used with this camera
Checking the Film Speed
The camera reads the film cartridge's DX code and sets the film speed
automatically within ISO 25 - 5000.
* Set the Command Dial to a Creative Zone mode.
Press the
move the <►> arrow to
the LCD panel.
► The film speed will appear on the
LCD panel.
Unloading Film
After the film's last frame is exposed, the camera rewinds the film automatically.
n
After the film is rewound, there will be a
shutter-release sound. Check that the
<@> icon is blinking on the LCD panel,
then open the back cover and take out
the film cartridge.
19