A take the picture, The difference between
and <0, About program shift – Canon Rebel Ti 300V User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A Take the picture.
• Compose the shot and press the
shutter button fully.
a
The Difference Between
and <0>
• The
and <0> modes set the same shutter speed and
aperture settings automatically for picture-taking.
• The following features can be used with
, but not with
• Manual AF point selection
• AEB
• Film advance mode selection • Depth-of-field preview
• Program shift
• Multiple exposures
• AE lock with the <*> button ■ Built-in flash ON/OFF
■ Exposure compensation
About Program Shift
• In the Program AE mode, you can freely change the shutter speed
and aperture combination (program) set by the camera while
retaining the same exposure. This is called program shift.
• To shift the program, press the shutter button halfway and turn the
<£Ti> dial until the desired shutter speed or aperture is displayed.
• After the picture is taken with the shifted program, the shifted
program is canceled automatically and the original program is
restored.
• Program shift cannot be set when the built-in flash is used.
37