Mounting and detaching a lens, Mounting a lens, Remove the caps – Canon Rebel Ti 300V User Manual

Page 16: On the lens, set the focus mode, Detaching the lens

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Mounting and Detaching a Lens

Mounting a Lens

Remove the caps.

• Remove the rear lens cap and the

camera body cap.

Mount the lens.

• Align the red dots on the lens and

camera and turn the lens as shown

by the arrow until it snaps in place.

On the lens, set the focus mode

switch to .

• If the focus mode switch is set to

(or

on older lenses),

autofocus will not operate and

will be displayed on the LCD panel

Remove the front lens cap.

Detaching the Lens

While pressing the lens release

button, turn the lens as shown by

the arrow.

• When the red dot on the lens is at the

top, remove the lens.

' Keep the removed caps where you will not lose them
’ “AF” stands for Autofocus.
' “MF" (or “M”) stands for Manual Focus.