F move the < ^ > arrow to the < ■>)) > icon, Illuminating the lcd panel, Using the remote switch – Canon Rebel Ti 300V User Manual
Page 51: Lcd panel illumination, Silencing the beeper
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■>)) Silencing the Beeper
The beeper can be silenced in ali of the shooting modes.
"f
Move the < ^ > arrow to the < ■>)) >
icon.
• Look at the LCD panel and press the
< FUNC. > button. ((?)
6
)
"y
Set the setting to “
0
• Turn the dial.
• To enable the beeper to sound, set to
^ LCD Panel illumination
Illuminating the LCD panel.
• Press the <
> button. ((S
6
)
• To turn off the illumination, press the
<^>
button again or press the
shutter button halfway.
• While the LCD panel is illuminated,
pressing any buttons (except the
shutter button) or turning any dials
will extend the illumination time.
Using the Remote Switch
Connect the (optional) Remote Switch
RS-60E3’s plug to the camera’s
remote control terminal. Press the
release button to take the picture.
i
51