Canon Rebel Ti 300V - Manual (Page 46)

^Auto Exposure Bracketing (AEB)
With AEB, the camera automatically changes the exposure within the
set range (up to +/-2 stops in 1 / 2 -stop increments) for three successive
frames.
<1
Ш
“I Move the < ^ > arrow to the < ^ >
icon.
• Look at the LCD panel and press the
< FUNC. > button. ((2)6)
Set the desired AEB amount.
• Turn the dial.
► The AEB amount and AEB range
< ■ > are displayed on the LCD panel.
• The sample illustration left
shows an AEB amount of 1 stop with
respect to the correct exposure level.
Take the picture.
► The respective AEB amount is
displayed on the LCD panel and in the
viewfinder for each bracketed shot.
• The picture will be taken in the current
film advance mode, {-»page 35)
• After the three AEB shots are taken,
the AEB will not be canceled
automatically. To cancel AEB, set the
AEB amount back to “ £Jfl ”.
AEB cannot be used with flash or bulb exposures.
• During AEB shooting, the < ► > arrow mark and < ■ > AEB level icon next
to the < ^ > icon wiii biink.
• In the < S i > film advance mode, the camera will stop shooting automatically
after three shots
• If the self-timer or remote control is used, the three AEB shots will be taken
in continuous succession automatically.
• AEB can be combined with exposure compensation.
-2.1.0.1.2+ Correct
■ exposure
-2.1.0.1.2+ Decreased
■ - exposure
-2.1.0.1.2+ Increased
■ - exposure
46