O install the battery, O put the battery clip back into place, Basic operation – Nikon fe2 User Manual
Page 7: I| remove the battery clip
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
i| Remove the battery clip.
Turn the camera upside down and
use a coin to unscrew the battery clip lid
:65; in a counterclockwise direction.
o Install the battery.
Wipe battery terminals clean and
insert the battery into the battery clip in
accordance with the marks provided in
the clip, making sure the + sign is up.
Usable batteries are;
1) one 3V lithium battery; 2) two 1.55V
silver-oxide batteries (3.1V), or 3) two
1.5V alkaline-manganese batteries (3V).
Caution: Keep batteries away from infants and
small children. In case a battery is accidentally
swallowed, call a doctor immediately as the
material inside the batteries can cause serious
problems.
O Put the battery clip
back into place.
Slip the battery clip back into the camera
body baseplate and screw the lid clock
wise tightly into place.
Note:
For more information on batteries, refer
to page 59.
Note: The small numbers In the circles indentify parts of the camera as listed in the NOMEN
CLATURE section.