Shutter speed/mode indicator needle, Shutter speed/mode selector dial —21, Controls detail – Nikon fe2 User Manual
Page 23: Continued, Exposure indications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS
DETAIL
—continued
6
7
Exposure indications
The exposure indications appearing on the shutter speed/mode
scale at the left-hand side of the viewfinder indicate the neces
sary information for the correct exposure. Also the f/stop in use
appears through the ADR window
m
above the viewfinder frame.
Meter needle
As soon as the shutter release button is depressed halfway to
switch on the meter, the black needle automatically swings up
to show the correct shutter speed, according to the subject
brightness and the f/stop set on the lens. Please note that the
needle doesn't move before the frame counter reaches frame
“ 1" or when the shutter speed/mode selector dial is set at M250
or B.
(DOutside-exposure-range warning marks
d)A(Auto)
d: Shutter speed scale
® Shutter speed/mode indication needle
(D Meter needle
(DM250
(DB(Bulb)
(Df-number in use
Shutter speed/mode indicator needle
This green needle moves accordingly as you turn the shutter
speed/mode selector dial. For example, turn the shutter speed/
mode selector dial to A and the indication moves to the A posi
tion to indicate automatic operation.
Outside-exposure-range warning marks
Both the upper and lower portions of the shutter speed scale
are in red to indicate an exposure that is outside the meter’s
range. If the black meter needle is located in either of these
red areas after metering, adjust the f/stop on the lens until the
needle moves out of these areas.
For more information refer to page 24.
22