4 o make blank exposures until the frame, Counter 59 reaches frame “1 – Nikon fe2 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•
4 o Make blank exposures until the frame
counter 59 reaches frame “1,”
The film advance lever doubles as a shutter release button lock:
to unlock the shutter release button pull out the film advance
lever to the standoff position as shown in the photo. To dispose
of the first few frames exposed during film loading, continue to
alternately advance the film and depress the shutter release
button until the frame counter reaches frame “1.” Check that
the rewind knob is rotating, indicating the film has been loaded
correctly and is being advanced. If the knob does not rotate,
reload the film.
Notes:
1) Set the shutter speed/mode selector dial
(i9;
to A or a fast shutter speed
while making blank exposures.
2) Up to frame “1," the meter needle in the viewfinder does not move and
this indicates that the meter is not functioning; therefore do not take
pictures prior to the first frame.
r
i
■ li
14 Press the shutter
release button
lightly to switch the
exposure meter on.
The shutter release button activates the
exposure meter when lightly pressed.
The meter stays on for approx. 16 sec.
after you have taken your finger off the
button.
11