Aq take the photograph, Advance the film, Basic operation – Nikon fe2 User Manual
Page 17: Continued
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
—continued
^0
n
2000
1000
500
250
60
30
15
8
2
I
1
AQ Take the photograph.
Look through the viewfinder and depress the shutter
release button halfway. The shutter speed, in accordance with
the subject brightness, is then indicated inside the viewfinder by
the black meter needle. If the shutter speed needle points
above 1/30 sec., depress the shutter release button all the way.
If the shutter speed is 1/30 sec. or below, turn the aperture ring
on the lens to make the speed at least above 1/30 sec. If you
cannot obtain such a speed, refer to page 24.
Notes:
1) A blurred photo may result if you take the shot at a shutter speed
between 1/30 sec. and 8 sec.
2) If the black meter needle is on either of the red exposure warning
marks, the shutter speed is out of the metering range. In this case,
you cannot obtain the correct exposure. See page 24 for more details.
1
Advance the film.
“ * ■ Wind the film advance lever as far as it will go to
transport the film to the next frame and ready the camera for
the next shot. Do not apply excessive pressure in winding the
lever.
Note:
Don’t press the film rewind button
double exposed.
or certain frames may be
1 6