40 camera, Back, 4 ^ take p film slack – Nikon fe2 User Manual

Page 11: Set the asa/iso film ' speed ring h, Basic operation, Continued

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BASIC OPERATION

—continued

camera

back.

Snap the camera back shut.

4 ^ Take p film slack.

“

“ Fold out the film rewind crank ®

and rotate it gently in the direction of the
arrow on the film rewind knob until you

feel a slight resistance. Then fold the

crank back in.

Lift up
rotate

dot ®

Make

dial
sential

meter
in use.

Set the ASA/ISO film

' speed ring h .

the ASA/ISO film speed ring and

it in either direction until the index

is opposite the film speed in use.

sure the exposure compensation

is set at 0. These actions are es-

to activate the camera’s exposure

for correct exposure of the film

Notes:

1) The film speed is printed on the film carton

and the cartridge itself.

2) If the exposure compensation dial is not at

0, refer to page 36 for details.

Distributed by WWW.LENSINC.NET