To change focusing screens, Accessories, Interchangeable focusing screens – Nikon fe2 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES
Interchangeable Focusing Screens
Three different types of focusing screens are usable with the
Nikon FE2. The Type K2 screen comes with the camera as a
standard accessory. You can also use the optional focusing
screens, Type B2 (matte/Fresnel with focusing spot) or Type
E2 (matte/Fresnel with focusing spot and etched grid lines)
to match your particular requirements.
To change focusing screens,
follow this procedure;
1. Remove the lens from the camera body.
2. Note the focusing screen release latch (D at the top front of
the mirror box casting. Slip the small tip of the special tweez
ers that come with the optional screens under the latch and
pull outward to spring open the holder.
3. Take the screen out of the holder by grasping the small tab
with the tweezers.
4. To mount another screen, carefully position it in place with
the flat side face down and the side with the tab up.
5. Then push the front edge of the holder upward with the
tweezers until it clicks into position.
Notes:
1) To avoid getting smudges or fingerprints on the screen's optical sur
face, do not handle the screen with your fingers.
2) TTL metering of the FE2 is adjusted in accordance with the clear-
matte type finder screen. Therefore, when you change the focusing
screen, please use those screens designated for the FE2.
50