Self-timer lever – Nikon fe2 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-Timer Lever
S)
This device is useful in taking self-portraits or when you want
to include yourself with other people. Set the self-timer by
turning the lever as far as it will go in the direction of the arrow
shown in the photo. This can be done either before or after the
film is advanced. After the self-timer has been set, press the
shutter release button. The reflex mirror will go up and the self-
timer will start to operate; the shutter is released after a delay
of approx. 10 sec. If you want to cancel self-timer operation
after the lever has been set, move it back to its original position
with your finger. You can then take the picture the ordinary way,
as before. However, turning the self-timer lever when it is
already in operation will result in the shutter being released the
moment the lever is back in its original position. With the excep
tion of B, the self-timer can be used at any shutter speed.
Memo Holder #
To remind yourself of the film type and the number of exposures
on the roll of film in use, clip off the end of the film package and
insert it into the memo holder. Of course, you can use the memo
holder to store anything, such as your name card.
41