Cabletron Systems EMM-E6 Ethernet - Manual (Page 178)

APPENDIX B: COMMONLY-USED OIDs
B-6 EMM-E6 User's Guide
B.4 ENABLING & DISABLING SNMP TRAPS
The EMM-E6 supports the collection and reporting of SNMP Traps of
several types and at several levels. SNMP Trap sending may be enabled or
disabled for the following trap types: segmentation, link, and source
addressing. The traps may be enabled on the network level, module level,
or port level.
B.4.1 Enabling Network Level SNMP Traps
The next three OIDs control traps enable and disable at the network level
or channel level.
rptrHwTrapsSetLink
Description: Enables and disables link traps for this network (i.e.,
Channel A, B, or C).
Object Identifier: 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.1
Data Type: Integer
Values: 1 disable
2 enable
Access Policy: read-write
rptrHwTrapsSetSeg
Description: Enables and disables segmentation traps for this
network (i.e., Channel A, B, or C).
Object Identifier: 1.3.6.1.4.1.52.4.1.1.1.4.1.6.1.2
Data Type: Integer
Values: 1 disable
2 enable
Access Policy: read-write
CH1Book Page 6 Wednesday, March 20, 1996 7:48 AM