Cabletron Systems EMM-E6 Ethernet - Manual (Page 132)

MIB NAVIGATOR COMMAND SET OVERVIEW
EMM-E6 User’s Guide 13-3
13.3 MIB NAVIGATOR COMMAND SET OVERVIEW
There are three categories of commands in the command set.
• Navigation Commands - Allows the user to access and manage the
MIB for the device running the MIB Navigator. Some of commands
also provide user community-string information. The commands are
as follows:
- branch - cd - ctron - dir
- get - ls - mib2 - next
- pwd - set - show - su
- tree - whoami
• Built-In Commands - Allows the user to access and manage
network devices connected to the device running the MIB
Navigator. The commands are as follows:
- arp - defroute - netstat - ping
- snmpbranch - snmpget - snmpset - snmptree
- traceroute
• Special Commands - Allows the user to exit from the MIB
Navigator. The commands are as follows:
- done - quit - exit
13.3.1 Conventions For MIB Navigator Commands
The following conventions are used for denoting commands:
• Information keyed by the user is shown in this helvetica font.
• Command arguments are indicated by two types of brackets:
- required arguments are enclosed by [].
- optional arguments are enclosed by <>.
MIB Navigator command conventions are as follows:
CH1Book Page 3 Wednesday, March 20, 1996 7:48 AM