Cabletron Systems EMM-E6 Ethernet - Manual (Page 131)

CHAPTER 13: MIB NAVIGATOR
13-2 EMM-E6 User’s Guide
13.2 ACCESSING THE MIB NAVIGATOR
The MIB Navigator function resides on your Cabletron device (EMM-E6,
ETWMIM, ESXMIM, etc.). Access the MIB Navigator in-band, through a
device (i.e., workstation) connected to the same network or internetwork,
using a Telnet connection.
To access the MIB Navigator, perform the following actions from a PC or
workstation:
1. Telnet to a device by typing telnet followed by pressing the Return
key.
The telnet > prompt will appear.
2. At the telnet > prompt enter open and the IP address of the device
followed by pressing the Return key, i.e.,
telnet> open 123.231.213.132
3. The following messages will appear:
.Trying 123.231.213.132
Connected to 123.231.213.132
Password:
4. Enter your password at the Password : prompt and press the Return
key. For security reasons, the password does not display when typed.
5. The MIB Navigator prompt, MIBNav ->, appears and you have access
to the MIB Navigator commands.
The password that you use is specific to the MIB that you are
accessing.
NOTE
CH1Book Page 2 Wednesday, March 20, 1996 7:48 AM