Cabletron Systems EMM-E6 Ethernet - Manual (Page 159)

STANDARD LOCAL DOWNLOAD
EMM-E6 User's Guide 15-7
15.3 STANDARD LOCAL DOWNLOAD
Table 15-1 provides a step by step procedure for downloading the
firmware image file. This section provides specific MIB OIDs, their
names, and the required setting for proper image file download. Refer to
your specific MIB walking tool documentation for instructions on how to
set MIB OID strings.
The Download OIDs for Cabletron products reside in Cabletron
enterprise MIBs (group 52). The specific OIDs necessary to perform an
image file download reside in the common download group under
ctDL (Cabletron Download). The full OID string to reach this group is:
1.3.6.1.4.1.52.4.1.5.8.1
When performing the steps in Table 15-1, keep the following in mind:
• You must follow the steps in order.
• Enter the IP address of the tftp server in standard dotted decimal
notation (e.g., 132.177.118.24).
• Enter the FULL path to the image file in the ctDLTFTPRequest OID,
including the name of the image file (e.g., c:\tftpboot\EMME6.hex).
Table 15-1. Standard Download Procedure
Step OID Name OID Number
Data
Type
SNMP
OID Data
(1). ctDLForceOnBoot 1.3.6.1.4.1.52.4.1.5.8.1.1.0 integer 1
(2). ctDLCommitRAMToFlash 1.3.6.1.4.1.52.4.1.5.8.1.2.0 integer 1
(3). ctDLTFTPRequestHost 1.3.6.1.4.1.52.4.1.5.8.1.4.0 IP
address Enter the IP
address of
the tftp
server.
(4). ctDLTFTPRequest 1.3.6.1.4.1.52.4.1.5.8.1.5.0 string
(ASCII) Enter the
path to the
image file.
(5). ctDLInitiateColdBoot 1.3.6.1.4.1.52.4.1.5.8.1.3.0 integer 1
CH1Book Page 7 Wednesday, March 20, 1996 7:48 AM