Playing back messages, Nmsaae, O “tl^jndla^on stii9m tihe – Sony SPP-A60 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing Back Messages
(SKIP/FF
) -
(STOP/PLAY ) ■
(REPEAT/REW)-
ni—___________ I“
L_=_J
SPEAKER VOL
tittitxiuxtxiu
illiliiiliilllli
# i
»|o “tl^Jndla^on stii9m tihe
of
nmsaae»,
iV^Tndic^af^tepe movement
rof
ofwra^oh.
ONLT^
.....................
indication shows that the tape is
«¿tMlI wlh messages.
• "P” indication shows power failure.
Your OGM, the number of mes>
■ages, ID code and current time
are erittlif, and die bacIcHip
are exhausted.
When there are new messages recorded not
yet played back, the ANSWER lamp and the
number of the messages in the message
counter LED blink.
When the tape is at its end or fuil with
‘E” blinks.
Press (ANSWER) to play back the message.
The base unit rewinds the tape and
automatically plays back from the first
message which has not been played back.
After each recorded message, the unit will
announce the day of the week and time of
recording.
If no messages are recorded, five short error
beeps sound.
• Once you press (STOP/PLAY) during playback,
you cannot continue playback by pressing
(ANSWER). In this case, play back manually
using (STOP/PLAY)button.
• If there is a call during tape playback, rewinding,
orfast-fonwarding operation, the operation is
canceled.
When all messages have been played back
The unit is set to record new incoming
messages. The message counter LED shows
“0” (or “A” in ANN ONLY mode).
To adjust the speaker volume of the base
unit
Slide the SPEAKER VOL control.
SPEAKER VOL
33