Sony SPP-A60 - Manual (Page 21)

To check the current time
1 Press (REMOTE).
The REMOTE lamp lights up.
2 Press®.
You will hear a long confirmation beep,
and then the present day of the week and
the time anounced.
Press (REMOTE) to end operation.
The REMOTE lamp goes off.
• If 2 minutes elapse while performing steps 2 to 5,
the operation is canceled. Try again from step 1.
• When the power is connected, Sunday, 12:00
AM is set and the built-in clock starts operation.
If you press ® to check the current time without
setting the time, a time which is not the current
time will be announced.
• if a power interruption occurs when the back-up
batteries are either exhausted or not installed, the
current time will be erased. In this case, set the
current time again.
I
&
21