Sony SPP-A60 - Manual (Page 26)

Using as a Telephone
Changing Channels for Better Reception
!
I
ca
I
s
I
I
?
I
I
f
oooo
— J
------^----------
O'o'o
OOO
OOO
OOO
OOO
o C3 a
s a C3
t (CHANNEL}.
When you hear interference noise during
conversation on the handset, try bringing the
handset closer to the base unit.
If interference still persists, press
{CHANNEL) of the handset to select an
alternative channel.
The channel lamp blinks, and lights up when
the channel has changed.
• If you tty to change the channel when the
handset is too far fronn the base unit, five short
error beeps will sound and the channel cannot be
changed.
• In this case, bring the handset closer to the base
unit and try again.
Using Your Long-distance Service
Some services, such as MCI, Sprint and other
“alternative long-distance" companies, may
require the distinct tones generated by a
touch-tone phone. If you have pulse-dial
service, you can still access these senrices
through a process called “mixed dialing”.
1 Press (TÁOD.
2 Dial the access number of the service you
want to use.
0"O^O
OOO
bod
t (SEE)
2
’3®crON^
26
3 After you are connected to the service,
press ® (TONE).
This switches your phone temporarily to
emit tone signals.
4 Dial the long-distance number when
instructed by the long-distance company.
> The above procedure is a typical example.
Actual sequences will vary according to the
service you are using.
> The tone mode is canceled when you press
(TALK). You must press the(*) (TONE) each
time you use “mixed dieiling”.