Installing the battery pack – Sony CCD-FX510 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing the Battery Pack

When you have finished charging the battery, install the battery pack as follows:

1 With the arrow mark on the battery pack up, align the flat side of the battery pack with

the white line on the camcorder.

2 Push down and slide the battery pack in the direction of the arrow.

Notes
• Make sure the battery is securely installed so that it does not come loose. If the battery

is not installed properly, the camcorder does not work.

• You can use the AC power adaptor as a power source when recording indoors (see

page 25).

Removing the battery pack

Press the ВАТТ knob in the direction of the arrow, and at the same time, slide out the

battery pack to the left.

Getting Started