Sony CCD-FX510 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing a tape
1
Insert a tape to be recorded on into the recording VCR.
Slide the EDIT switch on the camcorder in the direction of the arrow
Set the POWER switch on the camcorder to VTR, and then insert the
recorded tape into it.
Play back a tape on the camcorder until you locate the point where you
want to start editing, and then set the camcorder to the playback pause
mode.
On the recording VCR, locate the recording starting point and set the
VCR to the Recording Pause mode.
Press
II
PAUSE on the camcorder and VCR simultaneously to start
editing.
Editing more scenes
Repeat steps 4 to 6.
To stop editing momentarily
Press
II
(PAUSE) on the recording VCR.
To stop editing
Press (STOP) on both VCRs.
If you use the DATA SCREEN function
The indicators displayed on the TV screen will also be recorded.
Use of the EDIT switch
When you set EDIT in the direction of the arrow (EDIT ON), you can minimize the picture
deterioration that results from editing. Avoid using the edited tape for multiple generations
of editing. After editing, be sure to set this switch in the opposite direction of the arrow
(EDIT OFF).
58
Advanced Camera Operation