Sony CCD-FX510 - Manual (Page 28)

Recording with the Camera
Putting an Age on Your Tape
Here's how to put the age of your children in your video while recording.
Make sure that birth dates have been stored in your camcorder. See page 14.
1
During recording, press START/STOP at the
point you want to insert the age of a person
or the eiapsed time.
This puts the camcorder in the Standby mode.
2
Press AGE/EVENT to select the indicator
you want to record.
Each time you press AGE/EVENT, the indicator in
the viewfinder changes as follows:
Q] The first age -»[U The second age
^------ (D The third event *------ ^
In the display window as follows:
1 -+2
'i /
3
An item with no presetting is skipped.
The Ul, [D. or [3 indicator goes out after
one second.
3
Press START/STOP.
Recording starts again.
The indicator in the viewfinder is recorded with the
picture.
AGEEVENT
Note You cannot add the age later during playing back or editing.
To stop recording the age
Press AGE/EVENT until the indicator goes out.
To change the display while recording
Press AGE/EVENT until the indicator you want to record Is display^. Recording of the
indicator you select starts when the indicator numbers (T], ¡2], or [s] go out.
28
Advanced Camera Operation