Press start/stop, To cancel the zero mem, Slide the power switch to camera – Sony CCD-FX510 User Manual
Page 33: Set the standby switch up, To stop playback
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press START/STOP.
Insert recording begins. The insert recording stops
automatically at the counter zero point.
To cancel the ZERO MEM
Press ZERO MEM.
Note
The picture may be distorted at the ending point when played back.
Checking the Recording in the Viewfinder (EDITSEARCH)
You can check the recorded picture in the viewfinder using EDITSEARCH. Sound
cannot be monitored.
Slide the POWER switch to CAMERA.
Set the STANDBY switch up.
Keep pressing the + or - side of
EDITSEARCH to view the playback
picture:
+ side for the playback picture
- side for the playback picture in reverse.
Cl.
JJi
+ EDITSEARCH-©
To stop playback
Release EDITSEARCH.
To monitor the sound while viewing the playback picture in the viewfinder
1 Connect headphones to the 0 (headphone) jack.
2 Press the small green button and slide the POWER switch to VTR.
3 Press ◄◄ to rewind the tape and press 1 where you want to stop.
4 Press t> to start playback.
Advanced Camera Operation
33