Sony CCD-FX510 User Manual
Video, Vídeo camera recorder b, 8 handy cam
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- Vídeo Camera Recorder B
- Welcome to Video 8
- 1
- 1
- 1
- Insert two size AA (R6) batteries with correct polarity.
- Set the POWER switch on the camcorder as follows:
- Aim the Remote Commander at the remote sensor of the camcorder and press the appropriate button on the Commander.
- During camera recording, or when in standby mode, press DATE for date indicator or TIME for the time indicator.
- To stop recording the date or time
- 2 Press AGE/EVENT to select the indicator you want to record.
- 3 Press START/STOP.
- To stop recording the age
- To change the display while recording
- To cancel a stored birth date
- About memory back-up
- When you connect the camcorder to a TV during recording
- Press the - @ side of EDiTSEARCH momentariiy.
- Note on using EDiTSEARCH
- If the tape approaches its end during recording
- Notes on recording
- Note on standby mode
- Note on light sources
- 1
- Set the STANDBY switch up.
- Look in the viewfinder and find the point where you want to begin recording:
- At the desired point, reiease EDITSEARCH.
- Press START/STOP.
- To pause recording
- To stop recording
- Press START/STOP.
- To cancel the ZERO MEM
- Slide the POWER switch to CAMERA.
- Set the STANDBY switch up.
- To stop playback
- To monitor the sound while viewing the playback picture in the viewfinder
- When to use manual focus
- After shooting
- What is PROGRAM AE (Auto Exposure)?
- Setting Portrait mode
- Set the AUTO LOCK switch to the iower position.
- 3 Press PROGRAM AE until Sb appears in the display window and the viewfinder.
- 4 Press START/STOP.
- Resuming Automatic mode
- Setting to Sports mode
- Set the AUTO LOCK to the lower position.
- 4 Press START/STOP.
- Resuming Automatic mode
- Hints for effective camera work
- Setting to High-Speed Shutter mode
- 1 Select the type of fade by pressing FADER as follows:
- Press START/STOP.
- To cancel the fade-in/out function
- Using the fade-in/out function repeatedly
- Climbing
- Playing Back
- Without connecting adaptor
- If your TV has no VIDEO/AUDIO input jacks
- If your TV has VIDEO/AUDIO Input Jacks
- Making the same display appear in the viewrfinder on the TV (only on the Commander)
- Viewing a still picture (playback pause)
- Viewing a picture at 1/5 speed (slow playback) (only on the Commander)
- Connecting the camcorder
- Recording
- Set the IN/OUT selector on the camcorder to IN.
- Turn on the VCR or TV.
- Play back the tape or select the TV channel to be recorded.
- Set the POWER switch of the camcorder to VTR.
- 5 Insert a tape and slide • REC.
- 1
- 1
- If moisture condenses inside the unit
- If moisture condenses on the surface of the tape
- If moisture condenses on the lens
- Cleaning the viewfinder
- Reattaching the eyecup
- Assume a good posture for shooting
- Use a tripod
- Keep the horizontal plane level
- Lighting
- Brightness levels
- Power Sources
- Difference in Color Systems
- NTSC system countries
- Bulgaria, France, Guiana, Hungary, Iran, Iraq, Monaco, Poland, former Soviet Union,